WELL Pro WE13 M4 9'' AEG (GEN 2)
- Body, rail are made out of high-quality polymer with full real steel markings
- M-LOCK mounting system. These features allow for the attachment of accessories like grips or tactical lights.
- 9" Handguard
- 365 FPS (1.23 Joules)
- Featuring programmable ETU (Electronic Trigger Unit) from Eshooter.
- Build-in optical electronic system. A system based on two optical sensors detects the location of the piston rack and the trigger, which makes the trigger is much more responsive, and a full cycle with each shot, which significantly improves the replica's lifetime
- Quick spring change design. Spring change can be done from the rear buffer tube without removing from the receiver
- Rotary hop up chamber
- Includes a 100rd mid cap magazine
- Inner Barrel: 6.02 tight bore -- 285mm
- 11.1V Lipo battery is recommended for stock spring
- Wired to the rear with a Deans connector (Small Tamiya adapter also included)
Processor unit adjustment
To enter the programming mode, hold the trigger for approximately 10 seconds.
The number of beeps indicates the type of setting. To make a change to a given setting, hold the trigger as soon as you hear the desired number of beeps. Once the selection has been set, the programming mode is automatically exited.
Firing modes - 1x beep
Program 1: semi
Program 2: binary (shot when trigger is pressed and released)
Firing modes - 2x beeps
Program 1: full auto
Program 2: burst
Pre-cocking - 3x beeps
Program 1: pre-cocking off
Program 2: pre-cocking position 1
Programs 3, 4, 5: Positions not intended for DSG gears. The manufacturer recommends using the first two programs (1 and 2) ONLY.
